SATA 62703 Manual Del Uso página 17

Operation Instructions
- 1. Selection of Imperial/Metric system
Press"Mode" key
- 2. Distance measurement
Press "Measure" key
Note: During measurement, the instrument should be
vertically aligned with the measured surface in
still air.
- 4. Save measured value
a. Press"Measure" key
b. Press"X", "Y" or "Z" key
Note: The stored value will correspond to the pressed
key. For the same key, the newly stored value
will replace the previously stored value.
- 5. Display stored measured value
Press"X","Y" or"Z" key
62703
-15-
EN DE RU KO PT JA ES