Plantronics MIRAGE Manual Del Usuario página 6

VOLUME ADJUSTMENT/MUTE SWITCH
Fig. 6 If you are using an M12 or E10 adapter there is a variable
volume control. Start with setting 4, then increase or decrease
the setting until you reach a comfortable listening volume.
You can prevent a caller from hearing your voice by pressing the
mute switch on the adapter. Voice contact can be retrieved by
pressing the switch again.
If you use an adapter please refer to the adapter user guide.
If you do not have an adapter these features will be controlled
by your telephone system. Please refer to the appropriate
user guide.
CLOTHING CLIP
Fig. 7 The clothing clip keeps the headset properly positioned by
supporting the weight of the cord. Attach the clothing clip
comfortably at chest height, making sure there is enough slack
to allow for head movement.
FITTING WITH GLASSES
Fig. 8 If you are wearing glasses you can use the glasses clip to help
make the headset feel more stable. Slip the clip onto your
glasses and attach the headset to the clip. If you are wearing
thinner metal frames, use the middle tab to help hold the clip
in place. Then you can attach the headset.
QUICK DISCONNECT™
Fig. 9 Some headsets are fitted with a Quick Disconnect connector.
Before you use your headset, join the adapter cable and the
Quick Disconnect together.
When you separate the Quick Disconnect, you put the ongoing
conversation 'on hold' without removing the headset.
To do this, grasp the Quick Disconnect as shown and pull
straight apart. To resume the call, reconnect the two halves.
DIAGRAM KEY
GB
4