Safety Message to Maintenance Personnel
Listed below are some important safety instructions and precautions
you should follow:
•
Any maintenance to the system must be performed by a trained
electrician in accordance with NEC/CEC guidelines and local
codes.
•
Read and understand all instructions before operating this system.
•
To avoid electrical shock, turn off power to the system before
performing any maintenance.
•
The circuitry of the Model AV1-LED can be damaged by
electrostatic discharge. Follow anti-static procedures when
servicing this product.
•
Never alter the unit in any manner. Safety may be endangered if
additional openings or other alterations are made to the unit.
•
The nameplate, which contains cautionary or other information of
importance to maintenance personnel, should not be obscured in
any way.
•
To be an effective warning device, this product produces bright
light that can be hazardous to your eyesight when viewed at close
range. Do not stare directly into this lighting product at close range
or permanent damage to your eyesight may occur.
•
After performing any maintenance, test the system to ensure that it
is operating properly.
•
Establish a procedure to routinely check the system for proper
activation and operation.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
Installation and Maintenance Manual
Model AV1-LED Lights
■
13