Safety Messages To Installers And Users - Federal Signal AV1-LED Manual De Instalación Y Mantenimiento

Safety Messages to Installers and Users

It is important to follow all instructions shipped with this product. This
device is to be installed by trained personnel who are thoroughly familiar
with the country electric codes and will follow these guidelines as well
as local codes.
The selection of a mounting location for the Model AV1-LED, its
controls, and wiring routing must be done under the direction of the
facilities engineer and the safety engineer. In addition, listed below are
some other important safety instructions and precautions you should
follow:
• Read and understand all instructions before installing or operating
this product.
• To avoid electrical shock, disconnect the light from the power
supply before installing the light.
• After installation, test the system to ensure that it is operating
properly.
• The product nameplate, which may contain cautionary or other
information of importance to maintenance personnel, should not be
obscured in any way.
• To be an effective warning device, this product produces bright
light that can be hazardous to your eyesight when viewed at close
range. Do not stare directly into this lighting product at close range
or permanent damage to your eyesight may occur.
• Establish a procedure to routinely check the system for proper
activation and operation.
• After testing is complete, provide a copy of these instructions to all
operating personnel.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
Installation and Maintenance Manual
Model AV1-LED Lights
■
5