Kickback Information; Guide Bar And Saw Chain Combinations; Saw Chain FIling And FIle Gauges - Husqvarna 135 Manual De Instrucciones

Furthermore the saw chain Husqvarna H37 is evaluated and listed as a Type C Low Kickback Saw Chain according to
the provisions in Z62.3-11 (R2016).
A hard nose guide bar having the same length and nose radius as a sprocket-nose guide bar may be considered to have
equivalent or less kickback energy than the sprocket-nose bar.

Kickback information

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
The following cutting attachments are type approved for the models Husqvarna 135, 135e and 135e TrioBrake.

Guide bar and saw chain combinations

The following recommended combinations of bar and saw chain are type approved for your chain saw.
Guide bar
Length, inch Pitch, inch
14
3/8
16
Saw chain filing and file gauges
H37
34 – English
TECHNICAL DATA
Gauge, inch
0.050
Saw chain
Max. nose radius Type
9T Husqvarna H37
Drive link count
52
56
1158605-49 Rev.2 2017-04-28