Specific Safety Rules For Hedge Trimmer - PowerSmith 20V MAX LITHIUM-ION Manual Del Operario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SPECIFIC SAFETY RULES FOR HEDGE TRIMMER

• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after
turning them off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. Proper handling of the
hedge trimmer will reduce possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact
hidden wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
• DangEr – Keep hands away from blade. Contact with blade will result in serious personal injury.
• Keep hands and feet away from the cutting device at all times and especially when switching the
product on.
• Do not try to grasp or remove trimmings when the product is running. Only remove trimmings when the
product is switched off and disconnected from the power supply.
• never hold the product by the guard.
• always be sure of a safe and secure operating position, while using the product.
• never use the product standing on steps or a ladder. Do not work over shoulder height.
• always ensure the safety guard supplied is fitted before using the product. Never attempt to use an
incomplete product or one fitted with an unauthorized modification.
• Check the cutting device regularly for damage, and if damaged repair immediately.
• Do not overload the product.
• Check immediately if the product starts to vibrate abnormally. Excessive vibration can cause
injury.
• Switch the product off when the cutting device is blocked. Disconnect it from power supply (i.e.
remove the battery pack) and remove the blockage. Inspect the cutting device for damage before using the product
again.
• Follow the maintenance and repair instructions for this product. Never carry out any
of the
product. Information about maintenance and repair is provided in this instruction manual.
• Know how to stop the product quickly in an emergency.
• Do not expose the product to rain. Do not operate the product on a wet hedge.
• Use the product only in daylight or good artificial light.
• Check the hedge for foreign objects before operation, e.g. wire fences. Take care that the cutting
device does not come into contact with wire or other metal objects.
• Hold the hedge trimmer properly, e.g. with both hands if two handles are provided. Loss of control
can cause personal injury.
English
5
modifications

Publicidad

Tabla de contenido
loading

Tabla de contenido