Fan Speed; Navigation Through Zones - Airzone FLEXA 3.0 Manual De Instrucciones

Fan Speed

It is used to set the speed of the AC unit fan. The speed is set in automatic mode by default, imposing the flow depending on
the number of zones in demand. In fancoil installations, the system speed can be manually selected from the Master thermostat.
High speed.
Medium speed.
Depending of the installation, enables to directly select the speed of the unit, setting the value 1 as the lowest speed. The
speed is set in automatic mode by default.

Navigation through zones

From the main screen press on the name of the zone, a list with all the zones and their status will be displayed. This screen
enables the control of all the zones at the same time or individually, it is also possible to switch on/off the zones from this
screen, press < and > to see the rest of the zones.
Access to all the zones
Access to the zone
Room temperature
of the zone
The "All zones" option gives access to the control of all the zones at the same time, broadcasting the changes to all of them.
Press on the zone's name to access to all the parameters of the zone and control them from your controller. When the system
detects a temperature error on a specific zone, the zone displays the error code instead of the room temperature (see section
Warnings and errors).
Remote zone icons:
- Exit zone. It closes the zone and returns to the main zone.
- It returns to the list of zones.
Low speed.
Automatic speed.
Turn on/off all the
zones
On/Off of the zone
Set-point temperatura
of the zone
ES
EN
FR
IT
PT
DE
25