Home Screen - Airzone FLEXA 3.0 Manual De Instrucciones

HOME SCREEN

Press on the Airzone icon once to deactivate the screensaver and go to home. Once there, you will find the following functions:
ES
Operation mode
EN
FR
Zone
IT
Settings menu
PT
Sleep Mode
DE
Home screen/ Confirm
Navigate through the Think Controller by pressing the side buttons on the control bars.
Operation modes. It displays the operation mode selected from the Master controller: cooling, heating, ventilation and stop
(See section Operation mode).
Eco-Adapt function. It defines the level of energy efficiency set by the Blueface.
Fan speed. It is an indicator of the fan speed of the AC unit. That speed is set from settings menu (See section Fan speed).
Zone/Room temperature. It displays the zone where the thermostat is located. Its name is defined from the Airzone Blueface
thermostat. It displays the room temperature of the zone.
Settings menu. The Sleep mode parameters can be always configured. If you have a Master Think, you can change the
operation mode and the fan speed. (See section setting menu).
Set-point temperature. It displays the temperature set from the Think control bar (See section temperature settings).
Relative humidity. Indicator of the humidity of the environment.
Sleep Mode. Indicator of the state of the Sleep mode (set from settings menu or from the Blueface).
Time schedules. It displays the state (on/off) of the time schedules of the zone. It is set from the Blueface.
Control bar. It adjusts (by pressing or by sliding) all the parameters controlled by the Think.
Airzone. A button used to confirm and return to home.
On/Off. On/off of the zone where the thermostat is located.
30
Eco-Adapt function
System speed
Control bar
Set-point temperature
Relative humidity
Time schedule
On/Off