Installing The Awning - Dometic Premium Markise DA20DC Instrucciones De Montaje

DA20DC
7

Installing the awning

7.1 Required installation material
For the installation of the awning, you will need:
 Drill bits:  8 mm and 11 mm
 Counterbore
 Metal saw
 10 mm open-ended spanner or connection socket
 Torque wrench
 Phillips screwdriver or bit
 A suitable flexible adhesive/sealant, such as Sikaflex
 Cleaner recommended for use with the adhesive
 Primer recommended for use with the adhesive
7.2 Installing the awning
WARNING! Beware of injury
!
Always install the mounting bracket using the supplied spacer
sleeves, shortened to 2 mm less than the thickness of the external
wall. Otherwise, the awning can break off and cause serious injury.
NOTICE!
A
Make sure that you do not damage any cables or cabinets when
drilling.
➤ Remove the awning from the premounted mounting bracket (fig. 7,
page 1).
➤ Determine the location of the installation.
In particular, check that there is enough space in the interior to mount the
backer plates at the points where the screws will be.
EN
Installing the awning
®
-252 for example
17