Publicidad
Idiomas disponibles
Idiomas disponibles
9. Remove (4) Phillips screws now
exposed securing the lower switch
panel, and then unplug and remove
the panel. (Figure I)
Note: All of the switches
will need to be removed and
installed into the new switch
panel provided.
10. Remove (2) Phillips screws, and
then unclip and move aside the
vent assembly above the radio
opening. It is not necessary to
remove the assembly. But if
desired, there will be a cable
attached to the assembly that will
need to be removed. (Figure J)
11. For non-NAV equipped cars,
remove (2) Phillips screws
securing the plastic radio/climate
housing from the radio/climate
cavity, and then remove.
Continue to sub-dash airbox
modifications
Dash Disassembly
(Figure I)
95-9312B
(Figure J)
5
Publicidad
