Technical Characteristics; Unpacking; Machine Preparation - Nobles SCOUT 6 Manual Del Operario

TECHNICAL CHARACTERISTICS:

Description
Width-including side brush
Length-including side brush
Height-including handle
Machine height W/Handle folded
Cleaning Path Width (main + side brush)
Weight
Hopper capacity (real)
Run time
Filtering surface
Filtration
Productivity (for Hour) Theoretically Max
Productivity (for Hour) Estimate Coverage
Total power consumption
Type of battery
Noise level

UNPACKING:

Unpack the machine carefully avoiding movements that can cause
damage.
Once the machine is unpacked, check the condition of its parts. In
case the machine is broken in any of its parts, contact immediately our
authorized dealer.
For shipping and packaging purposes, some assembly is required. For
correct assembling instructions, see machine preparation
Packaging contents:
Machine
Side brush
Use and maintenance manual
Warranty card
Maintenance free type battery
4mm hex wrench
PCB Control 20 amp spare fuse
Actuator 2.5 amp spare fuse
Charger 1.25 amp spare fuse
Charger cord
In the case anything of the above should be missing, contact immediately
our authorized dealer.
Assure that all packaging material (plastics, carton, pallet, etc.) are
collected and stored away from children.

MACHINE PREPARATION:

Side brush assembly:
700mm 28"
870mm 34"
1067mm 42"
510mm 20"
635mm 25"
53Kg 115lbs
3
35 Lt 1.25 ft
2h
0.95mq 10 sq.ft
particles up to 2 microns
1742 18750
m 2 /Hour ft 2 /Hour
1672 18000
m 2 /Hour ft 2 /Hour
360W/18A 360W/18A
Gel 42Ah/C20
61[dB]
Handle assembly:
Connecting the Battery:
Remove the top cover to gain access to the battery using the 4 mm hex
wrench provided.
Locate the two Red/Black connectors.
Align the colors of the connectors.
Plug the two connector together.
EN
Raise the front part of the machine, slide the brush on to the
shaft until it locks into place.
Release the handle locks as shown
Rotate handle into working height position
Return handle lock to the locking position
4