Inserting The Instrument; Remove The Instrument; Programs Push Button; Programs Selection - Microson m6 ITC P DIR Manual De Uso

INSERTING THE INSTRUMENT

1. Hold your hearing aid with
your thumb and your index
finger and place it carefully in
the ear canal. Move the outer ear
slightly upwards or downwards
to help.
2.
completely
gently. The hearing aid must
feel to be properly in place.

REMOVE THE INSTRUMENT

3. To take your hearing aid out,
pull the ear lobe to loosen the
hearing aid in the ear canal.
Use the other hand to open the
battery holder and pull gently on
the hearing aid to remove it.
NOTE: If your device has an
extractor, take hold of the end
and pull the hearing aid slowly
until it has been removed.
EN
Insert the hearing
by pushing
18
Your hearing aid has a push button that enables you
aid
very
Each program will permit you to better adapt to
different environments or situations of everyday life.
By way of example, your hearing aid may be equipped
with the following programs:
*Your hearing aid complies with the EN 60118-13:2005 standard on electromagnetic
compatibility.

PROGRAMS PUSH BUTTON

to select the desired program
As you press the push button, you
will hear tones indicating the
programme you are using.
Example: Two tones for program 2.
Follow the instructions of your
audio prosthetist to get the most
out of your hearing aid.

PROGRAMS SELECTION

1- Normal.
2- Restaurant.
3- Telephone*.
4- Traffic.
19
.
EN