Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
Galvanic corrosion may occur if steel
with aluminum truck body. Use vinyl
strips & brackets from truck body.
NOTE: Tape RH & LH mounting brack-
ets before bolting to vehicle.
1. Place strips of electrical tape (Kit item)
on RH and LH mounting brackets as shown
in FIG. 12-1. Then, apply strips of electrical
main frame housing (FIG. 12-1).
NOTE: Holes for mounting brackets are
marked and drilled only after
liftgate is in correct position on
the pickup bed.
2. Position the LH and RH mounting brackets
(Kit items) in the pickup bed just forward of
corner posts (FIG. 12-2).
3. Position liftgate in the rear opening of the
pickup bed (FIG. 12-2).
pickup bed
spare tire tube on truck
pickup bed
NOTE: Ensure nuts and lock washers
are on the inboard side of the
mounting brackets.
4. Bolt the main frame brackets on liftgate,
to the RH mounting brackets as shown
in FIG. 12-2. Handtighten bolts and nuts.
Repeat for LH mounting bracket.
LIFT CORPORATION Sht. 12 of 56 DSG#
INSTALLING LIFTGATE
M-16-32
2" X 14"
2" X 4"
2" X 8"
2" X 14"
LH BRACKET
TAPING MOUNTING BRACKETS
RH MOUNTING
BRACKET
MAIN FRAME
LH BRACKET
BOLTING LIFTGATE TO RH
MOUNTING BRACKET
Rev. C Date: 08/13/19
2" X 14"
RH BRACKET
2" X 14"
2" X 4"
2" X 8"
FIG. 12-1
3/8"-16 HEX BOLT,
3/8" LOCK WASHER
3/8" HEX NUT
(3 PLACES)
MAIN FRAME
RH BRACKET
FIG. 12-2
Publicidad
Tabla de contenido
