General Characteristics - Sacopa 10306 Serie Manual De Instrucciones

IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before
beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the Mini light for LED's, follow the instructions provided below:
1. VERIFY THE CONTENTS OF THE PACKING:
The following accessories are included inside the box:
Quick coupling Mini light
Models : I0306MIR, I0306MPR,
I0306WIR, I0306WPR, I0306NWIR
Mini light for SPAs
Models : I0307MIR, I0307MPR,
I0307WIR, I0307WPR
- Unit floodlamp
- Decorative cover
- Butt joint
- Nut
- Installation and
maintenance manual
-Manual for electrical connection

2. GENERAL CHARACTERISTICS:

This floodlamp is a Class III electric apparatus with very low safety voltage.
The floodlamp complies with IPX8 degree of protection (resistance to penetration of dust, solid bodies and humidity) at a The floodlamp complies with IPX8 degree of protection (resistance to penetration of dust, solid bodies and humidity) at a
nominal immersion depth of 2 m.
This floodlamp complies with international safety standards for lights, especially the EN 60598
PART 2: SPECIFIC REQUIREMENTS SECTION 18 LIGHTS FOR SWIMMING POOLS AND SIMILAR APPLICATIONS. PART 2: SPECIFIC REQUIREMENTS SECTION 18 LIGHTS FOR SWIMMING POOLS AND SIMILAR APPLICATIONS.
The manufacturer is not responsible in any circumstances for assembly, installation or start-
which have been inserted or handled at locations other than its own premises.
3. INSTALLATION:
• In order to clearly light a pool it is recommended to install a floodlamp every 5 m
which are especially deep, a floodlamp is required for every 10 m
• In order to prevent glare, the floodlamps should be installed so that they face away from the residence or usual view of
In order to prevent glare, the floodlamps should be installed so that they face away from the residence or usual view of
the swimming pool.
• In the event that lighting is used in training or competition pools, the floodlamps should be installed on the sides to
In the event that lighting is used in training or competition pools, the floodlamps should be installed on the sides to
prevent glare on the swimmers.
• To avoid the need to empty the pool to change the lamp, we recommend that the floodlamp be installed
To avoid the need to empty the pool to change the lamp, we recommend that the floodlamp be installed in areas which
are accessible from the upper edge of the pool.
Prior to installation verify that the gland seal has been fully tightened.
4. ASSEMBLY:
Quick coupling Mini light
This light is manufactured for installation in guiding tube.
1. Install the wall conduit in the concrete wall, at a distance of 400-700 mm. below the water level (Fig. 1).
2. The wall conduit must be extended with a cable conduit the length of which remains above the maximum level of the The wall conduit must be extended with a cable conduit the length of which remains above the maximum level of the
swimming pool or spa (Fig. 5).
3. Feed the light cable through the conduit (Fig. 6). Leave enough length of cable in order to be able to remove the
floodlamp to the border of the swimming pool (Fig. 2).
4. Then fit the light itself, pushing it into place (Fig. 7).
up. Therefore, the installer as well as the user must read the instructions before
- Unit floodlamp
- Decorative cover
- O'ring
- Installation and maintenance
manual
- Manual for electrical
connection
h international safety standards for lights, especially the EN 60598-2-18 standard: LIGHTS
through the conduit (Fig. 6). Leave enough length of cable in order to be able to remove the
E N G L I S H
, follow the instructions provided below:
Concrete pool Mini spot light
Models :
3
of water volume.
700 mm. below the water level (Fig. 1).
2
Mini spot light
I0308MIR, I0308 I0308MPR,
I0308WIR, I0308 I0308WPR
- Housing body Housing body
- Floodlamp unit Floodlamp unit
- Key for Key for Mini light
- Bag of screws Bag of screws
- Installation and maintenance Installation and maintenance
manual manual
- Manual for electrical Manual for electrical
connection connection
-up of any electric components
2
of water surface. In swimming pools of water surface. In swimming pools