Features - RIDGID R3101 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Stroke Length...........................................................0.59 in.
No Load Speed ............................................... 3,000 (SPM)
KNOW YOUR JIG SAW
See Figure 1, page 13.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BEVELING BASE
The base can be angled 45° left or right for a bevel cut.
BLOWER/VACUUM SWITCH
The jig saw is equipped with a convenient switch for man-
aging dust while cutting. First setting blows air to clean
line-of-sight while cutting. Second setting turns off air to the
line-of-sight air vent to allow the dust to be vacuumed up
through the rear dust port.
HEX KEY STORAGE
A hex key has been provided for use in loosening and ad-
justing no-mar base plate. When not in use it can stored in
the hex key strap.
LED LIGHT
The LED light, located above the blade clamp, illuminates
when the switch is turned on. This provides extra light in the
cutting area for increased visibility.
Input ..................................120 V, AC Only, 60 Hz, 3.0 Amp
Weight ..................................................................... 4.4 lbs.
NO-MAR BASE PLATE
A no-mar base plate has been included with the jig saw. The
plate protects delicate surfaces from being scratched by the
metal jig saw base.
ORBITAL FUNCTION WITH ON/OFF SWITCH
The orbital function on/off switch allows user control of the
orbital movement of the saw blade.
OVERMOLD GRIP AREA
The grip area is overmold for improved grip and comfort.
RAPID CHANGE BLADE CLAMP
The rapid change blade clamp allows for changing saw
blades without the need for separate tools.
RECESSED BLADE SUPPORT ROLLER
The recessed blade support roller ensures accurate cutting
during orbital and non-orbital cutting.
SLIDE SWITCH
The slide switch features a soft start to prolong motor life and
gives the operator more control when starting the jig saw.
VACUUM PORT
1-1/4 in. vacuum port conveniently fits a standard hose size
for a cleaner work area.
7 - English