Measuring Procedure; Discontinuing A Measurement - CVS Pharmacy 271244 Instrucciones De Uso

5.6. Measuring procedure

After the cuff has been appropriately positioned, the measurement can begin:
a) Press the ON/OFF button. The display will show many icons
followed by 3 beeps indicating "ready to measure."
b) Press the START button. The pump begins to inflate the cuff. The
rising pressure in the cuff is shown in the display of your monitor.
c) After a suitable inflation pressure has been reached, the pump
stops and the pressure gradually falls. The cuff pressures are
displayed. If the inflation pressure is not sufficient, the monitor
automatically re-inflates.
d) When the instrument detects a pulse, the heart symbol in the
display starts to flash and a beep is heard for every heartbeat.
e) A long beep is sounded when the measurement is complete. The
systolic, and diastolic blood pressure and pulse rate now appear
in the display.
f) The measurement reading remains on the display until you switch
off the instrument. If no button is pressed for a period of 5 minutes
the instrument switches itself off in order to
preserve the batteries.
g) When the unit is set to the Microlife Average Mode setting,
3 separate measurements will take place in succession after
which your result is calculated. There is a 15 second resting
time in-between each measurement. A count down indicates the
remaining time and a beep will sound 5 seconds before the 2nd
and 3rd readings will begin.
If one of the measurements causes an error message, it will be
repeated one more time. If any additional error occurs, the measure-
ment will be discontinued and error code displayed.
Expanding the MAM measurement to see the three individual
readings - This function allows you to view the three individual
measurements used to calculate the MAM measurement. After
taking a MAM measurement hold the memory button for 3
seconds until you hear a short beep. (Do not hold the button
longer than 7 seconds or you will delete all the readings in the
memory.) Let go of the button and watch the screen. It will
automatically scroll through the three measurements used in
the MAM measurement.

5.7. Discontinuing a measurement

If it is necessary to interrupt a blood pressure measurement for any
reason (e.g. the patient feels unwell), the ON/OFF button can
be pressed at any time. The device then immediately lowers the cuff
pressure automatically.
10
TIME
Pulse
Detected
1
User 1
TIME PM 7:26
Reading
for User 1
1
Average
Mode
Measurement
User 1
Time/Date
Average
Mode
is turned on
ON/OFF
Cuff
Pressure
Systolic
mmHg
Diastolic
mmHg
Pulse
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse
User #1