Step 3 - Front Wheel Assembly; Step 4 - Arm Bar Assembly - Foundations Quard Sport Manual De Instrucciones

1.
Align pivot shaft of stroller frame with hole in
wheel assembly. Wheel locking lever should be facing
up. Slide wheel assembly onto pivot shaft until a solid
click is heard and felt from the buttons engaging.
(Fig. 1)
2. Check the wheel is secure by pulling down on the
wheels. Wheels should stay securely in place.
1.
With Foundations
slide Arm Bar Clamp (1) between fabric seat side cover
and front leg. Push Arm Bar Clamp (1) onto front leg
tubes between the two Arm Bar Stops (2) and align the
hole in the clamp with the Stud (3) on the arm, on both
sides of the stroller (Fig. 1).
2.
Lock A rm Bar to stroller frame by pushing Arm Bar
Clamp (1) around front leg tube (4) .Close
the Lock lever by pressing the lock lever onto the Arm
bar until it clicks closed and the stud (3) is fully through
the hole in the lever. (Fig. 2).
3.
Repeat step 2 for opposite end of Arm Bar
Check that the Arm bar is securely attached.

STEP 3 - Front Wheel Assembly

STEP 4 - Arm Bar Assembly

logo on Arm Bar (E) facing up,
®
6
E
2
4
1
Fig. 1
AB20049_G4
Fig. 1
1
3
Fig. 2
3