Technical Data - Black and Decker RP250BE Manual De Uso

ENGLISH
Adjust the bars of the edge guide until the wheel is in
contact with the workpiece.
Switching on and off
Switching on
Keep the lock-off button (2) depressed and press the on/
off switch (1).
Release the lock-off button.
Switching off
Release the on/off switch.
Warning! Always operate the tool with both hands.
Hints for optimum use
When working on outside edges, move the tool
counterclockwise (fig. M). When working on inside edges,
move the tool clockwise.
Use HSS router bits for softwood.
Use TCT router bits for hardwood.
You can use the tool without a guide (fig. N). This is
useful for signwriting and creative work. Only make
shallow cuts.
Refer to the table below for common types of router bits.
Router bits (fig. O)
Description Application
Straight bit (1) Grooves and rebates
Trimming bit (2) Trimming laminates or hardwood;
accurate profiling using a template
Rebating bit (3) Rebates on straight or curved workpieces
V-grooving bit (4) Grooves, engraving and edge bevelling
Core box bit (5) Fluting, engraving and decorative edge
moulding
Cove bit (6) Decorative edge moulding
Ogee moulding bit (7) Decorative edge moulding
Rounding over bit (8) Rounding over edges
Dovetail bit (9) Dovetail joints
Chamfer bit (10) Chamfer edges
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
18

Technical data

Voltage
Power input
No-load speed
Collet size
Max. diameter of router bit
Max. depth of cut
Weight
Solamente para propósito de México:
Importado por: Black & Decker S.A. de C.V.
Bosques de Cidros, Acceso Radiatas No. 42
3a. Sección de Bosques de las Lomas
Delegación Cuajimalpa,
05120, México D.F.
Tel. (52) 555-326-7100
R.F.C.: BDE810626-1W7
Solamente para propósito de Argentina:
Black & Decker Argentina S.A.
Pacheco Trade Center
Colectora Este de Ruta Panamericana
Km. 32.0 El Talar de Pacheco
Partido de Tigre
Buenos Aires (B1618FBQ)
República de Argentina
No. de Importador: 1146/66
Tel. (011) 4726-440
Imported by/Importado por:
Black & Decker do Brasil Ltda.
Rod. BR-050, s/n˚ - Km 167
Dist. Industrial II
Uberaba - MG - Cep: 38056-580
CNPJ: 53.296.273/0001-91
Insc. Est.: 701.948.711.00-98
S.A.C.: 0800-703-4644
Hecho en China
Fabricado na China
Made in China
RP250BE
V 120/220
AC
W 1,200
min 8,000 - 27,000
-1
8 mm / 6.35 mm / 6mm
mm 30
mm 55
kg 3.6
187444-00