Power Source - Naxa NAS-5000 Manual Del Usuario

POWER SOURCE:

There is a built-in Li-ion rechargeable battery, recharge the battery if it is low.
1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro
USB Port on the rear of the unit.
2. Connect the full size USB Plug from the supplied USB Connection Cable to the
USB Port on the USB Charger (During
unit will turn RED,
NOTES:
Your battery will last longer if you're following these simple guidelines for charging
and storing:
A. Before first time use, charge it approximately hours until the unit is fully charged.
B. Recharge and store the unit within the temperature range of 5°C~35°C
(40°F~95°F).
C. Do not charge longer than 24 hours. Excessive charging or running the
unit until battery fully drains will damage the battery. Battery life will be extended
if you keep the battery fully charged.
D. Battery life naturally shortens slowly over time.
E. The built-in rechargeable battery in this product is not user replaceable.
AUX IN:
To listen from an external Audio Player such as a MP3 Player, Mobile Phone, etc.
1. Connect one end of the Audio Connection Cable to the AUX Out/Line Out/Audio
Jack on the external Audio Player.
2. Connect the other end of the cable to the AUX IN jack on the rear of the unit.
Switch on the unit, wait for the mode indicator to flash green only, press the MODE
button repeatedly until the Mode Indicator turns INDIGO.
3. Play music on the connected Player.
charging, the charge indicator on the top of
When finished, it will turn off).
8
4