Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Remove the rotisserie burner rear cover.
4.
Remove the screw on the igniter bracket and remove the
bracket.
5.
Use an adjustable wrench to remove the brass elbow
6.
Use a 6 mm socket wrench or 6 mm nut driver to remove
the orifice.
7.
Replace with the corresponding natural gas orifice.
IMPORTANT: Check that the NG orifice is properly
installed inside the valve.
8.
Reinstall the igniter bracket and tighten the screw.
9.
Reinstall the rotisserie burner rear cover.
35
Publicidad
Tabla de contenido
Solución de problemas
