Krups F 372 Manual De Instrucciones página 9

Cleaning
• Make sure that the control button for slice
thickness (f) is set to "0" and that the
appliance is unplugged.
• Do not immerse the motor of the appliance
in water or in running water.
• Then refer to the instructions provided in the
chapter entitled " Before first use ".
What to do if your appliance
does not work ?
• First, check the connection.
Your appliance still does not work ?
• Contact an authorized KRUPS service center
(see list in service booklet).
Limited One Year Warranty
Your KRUPS #F372 is covered by the following
warranty :
If within one year from date of purchase this
KRUPS product fails to function because of
defects in materials or workmanship, KRUPS
will, at its option, repair or replace the unit
with out charge, provided the owner has a
proof of date of purchase.
This warranty will be void if malfunction was
caused by damage to the product by accident,
misuse, use on frequency or voltage other
than marked on the product and/or described
in the instructions, abuse including tampering,
damage in transit, or use for commercial
purposes. This warranty gives you specific
legal rights, and you may also have other
rights which may vary from state to state.
9