Ajustes Y Uso - EasyStand Zing size 2 Manual Del Usuario

Ajustes y uso

Trays
Black Molded/Swing-Away Tray Height
58. To adjust tray height, loosen knobs on the
back of unit and set to desired position. Tighten
securely.
Black Molded Tray Depth
59. To adjust the tray, loosen the knobs on each
side until resistance is felt, then flip the gray lever
in the center of the knob fully open.
DO NOT continue to turn the knob
!
counterclockwise. Forcing the knob past its stop
will damage the mechanism.
The tray may now be removed completely, or
adjusted to the desired position using the click
detent positions as a guide. Once desired
position is achieved, tighten knobs securely.
Swing-Away Tray Depth
60. Loosen knob under the tray, pull or push into
desired position. Tighten securely.
Swing-Away Tray Angle
61. To adjust tray angle, loosen ratchet handles
on both sides of the tray, set to desired
position. Tighten securely.
Swing-Away Tray Swing-Away
62. Loosen knob on one side only until you are
able to swing tray away.
63. Swing tray away to allow for transfers.
60
62
Página 26
58
59
61
63