Installation Instructions - Garden Treasures VA68098 Manual Del Usuario

INSTALLATION INSTRUCTIONS

Arbors must be well secured to prevent tipping over from wind load. We have provided four ground
anchors for securing the arbor either into the ground or a concrete footing. In some cases it may be
acceptable to secure the arbor to an existing structure such as a fence post. If you are installing your
arbor on concrete or a deck, consult your local hardware store for the appropriate galvanized
bracketing hardware.
1. Insert the ground anchor stakes (N) 4 in. into each of
the posts. Fasten each ground anchor with 2 of the
provided screws as shown.
Hardware Used
AA
#8 x 1.5 in. Screw
2. To install arbor into the ground, move the arbor into its
final location (you will need a helper). When you are
satisfied with the location, mark the positions of the
posts, then move the arbor aside and lay it carefully
on its side.
Excavate 4 holes approximately 12 in. deep.
Carefully move the arbor back into position and level it
both vertically and horizontally.
Backfill the holes with the excavated soil to cover the
anchors.
1
x 8
N
2
12 in.
10
AA