Assembly Instructions - Garden Treasures VA68098 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Insert right and left arches (E and F) into arch keystone
(C) ensuring they terminate flush to the keystone insert
(B).
Ensure that the "R" and "L" identifications are located at
the bottom of the arch assembly. The tabs protruding
out of the keystone insert (B) should fit outside the
arches.
Ensure that the arches are orientated properly as per
illustration.
2. Fasten the arch system to the keystone (C) using the
supplied screws into the two pre-drilled holes.
Hardware Used
AA
#8 x 1.5 in. Screw
3. Invert the arch assembly and install two screws from
the bottom of the keystone (C) into the two pre-drilled
flanges on either side of the bottom of the keystone
insert (B). This will connect the bottom of the arches to
the keystone insert (B).
Hardware Used
AA
#8 x 1.5 in. Screw
1
E
2
x 2
3
x 2
5
R
C
B
AA
AA
F
L
L