Cleaning The Appliance - Silvercrest SHD 7.4 A1 Instrucciones De Uso

3. Tap out the dust filter
bin.
4. Clean the dust filter
leave them to air dry completely afterwards.
5. Reinsert the dust filter
left (in the direction of the
filter housing
6. Reinsert the dust filter
3
container . Always make sure that the dust filter
in the dirt container
7. Place the dirt container
the two markings under the
▯
and on the edge of the appliance are aligned with each other
(see Fig. 6). Turn the dirt container
edge of the appliance is under the
and the dirt container

Cleaning the appliance

1. Clean the housing and the 2-in-1 suction nozzle
moistened cloth. For stubborn soiling use a mild detergent on the
cloth.
2. Remove hair, lint and threads from the brush nozzle of the 2-in-1
vacuum nozzle
3. Dry all parts thoroughly before using the appliance again or
storing it.
SHD 7.4 A1
5
and the filter housing
5
and the filter housing
5
in the filter housing
4
(see Fig. 9).
5
and the filter housing
3
and the rubber lip seals the dirt container
3
back on the appliance. Make sure that
3
locks audibly into the appliance.
w
.
4
symbol) until it is seated firmly in the
symbol on the dirt container
3
until the ▯ marking on the
symbol on the dirt container
GB │ MT
4
into a waste
4
in tap water and
and turn it to the
4
into the dirt
5
sits straight
w
with a lightly
│
105
3
.
3
3
■