Lighting Instructions; Cleaning And Care - Blumfeldt Verdon Manual Del Usuario

EN
12
OPERATION

Lighting instructions

Place logs on the coal grid.
Note: Make sure that the wood lies centrally on the grille and does not reach
to the edge of the grille. The wood should not be stacked too high.
Then place light, dry wood chips under the logs.

CLEANING AND CARE

CAUTION
Danger of burns! Allow the fi replace to cool completely before
inspecting or cleaning it for damage.
Inspect the fi replace for damage
Check the fi replace regularly for damage to ensure product safety and a longer
service life.
1. Check all parts to make sure they are tight.
2. Check the components for damage.
3. If you fi nd damage to a component, have the fi replace repaired before
continuing to use it.
Cleaning
• Make sure that the fi re is completely extinguished when you no longer use
the fi replace.
• Make sure the fi re is completely extinguished and the fi replace has cooled
down before removing the ashes.
• Use a damp cotton cloth to remove soot. Clean the fi replace regularly to
ensure a long service life.
Note: The surface may discolour after repeated use.
• Do not use oven cleaner or scouring agents, as these can damage the
product.
• Clean the outside with water and a mild dishwashing liquid.
• For stubborn stains, use a citrus-based cleaner and a nylon brush.