Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: www.twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
Attach the f ireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
f ireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer.
All panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Left Side Panel (B), Center
Right Side Panel (C), Center Front Panel (D), and
set out face down on a scratch-free surface.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
3. Push the Center Left Side Panel and Center Right
Side Panel snug to the Center Front Panel. Make
sure the Wood Dowels are seated in the pre-drilled
holes.Connect the Center Left Side Panel (B),
Center Right Side Panel (C) and Center Front
Panel (D) with Connection Plate, tighten
Screws (T) through the pre-drilled holes.
E-2
GETTING STARTED
CAUTION:
HELPFUL HINTS
fireplace, take your time and use the hardware provided and a
CARE & CLEANING
Center
Front Panel
D
N
Connection
Plate
C
Center
Right Side
Panel
Center
Left Side
N
Panel
B
T
Publicidad
Tabla de contenido
