P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com, or call 1-866-661-1218 in English, 1-866-374-9203 in French,
1-866-661-1218 in Spanish. Please identify the parts you need, and model number. Make sure to
include your name and address.
• Some steps are more easily handled with two adults.
• Attach the fi replace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a qual-
ity Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on top of the mantel.
1. Dust your fi replace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
f ireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace. All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Front Panel (D), Right Front
Panel (C) and Left Front Panel (B) and set out
face down on the scratch free surface.
Insert one Wood Dowel (N) into each of
2.
the pre-drilled holes.
3. Push the Right Front Panel and Left Front Panel
snug to the Center Panel. Make sure the Wood
Dowels are seated in the pre-drilled holes. Insert
Bolt (L) and Washer (M) into the holes in the
mounting blocks.
HAND TIGHTEN ONLY.
E-2
GETTING STARTED
HELPFUL HINTS
CARE & CLEANING
Center Front
Panel
D
N
M
L
C
Right Front
Panel
N
B
Left Front
Panel