Changing Channels; Selecting The Picture Mode; Viewing Channel Information; Setting The Sleep Timer - Dynex DX-LCDTV19 Manual Del Usuario

8
4 Press CH+ or CH– to select the channel you want to add or
remove, then press ENTER to add or remove the channel from the
list.

Changing channels

To change channels:
• Press CH+ or CH– to go to the next higher or lower channel in the
memorized channel list.
Or, press the number buttons for the channel you want, then press
ENTER.
• Or, press CH.LIST to display the memorized channel list, press
CH+ or CH– to select the channel you want, then press ENTER.
• Or, to select a sub-channel, tune to the main channel, press –,
then press the number button for the sub-channel you want. For
example, to select digital channel 11.1, press 11, press –, then
press 1. To select analog channel 13.0, press 13, press –, then
press 0. You must press – after you press 13, or you will go to
digital channel 13.

Selecting the picture mode

To select the picture mode:
• Press PICTURE one or more times to select the mode you want.
You can select Personal, Standard, Mild, or Fresh.

Viewing channel information

To view channel information:
• Press DISPLAY. Current channel information appears.

Setting the sleep timer

You can set an amount of time you want your LCD TV to wait before it
turns off automatically.
To set the sleep timer:
• Press SLEEP one or more times to select the time you want. You
can select Sleep Timer-0min, Sleep Timer-5min, Sleep
Timer-10min, Sleep Timer-15min, Sleep Timer-30min,
Sleep Timer-4 min, Sleep Timer-60min, Sleep
Timer-90min, Sleep Timer-120min, Sleep Timer-180min, or
Sleep Timer-240min.

Adding favorite channels

To add a favorite channel:
1 Press CH.LIST. The channel list opens.
2 Press CH+ or CH– to select a channel.
3 Press FAVORITE to add the channel to the favorites channel list.
4 To remove a favorite channel, open the channel list, select the
channel you want to remove, then press FAVORITE.

Tuning to a favorite channel

To tune to a favorite channel:
1 Press FAVORITE. The favorite channel list opens.
2 Press CH+ or CH– to select the channel. Your LCD TV
automatically tunes to the channel you selected.

Adjusting picture settings

To adjust picture settings:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– to select an option.
You can select:
• Picture Mode–Selects the picture mode. You can select
Personal, Standard, Mild, or Fresh.
• Contrast–Adjusts the contrast.
• Brightness–Adjusts the brightness.
• Sharpness–Adjusts the sharpness.
• Color–Adjusts the color saturation.
• Tint–Adjusts the color tone. This option is only available in
NTSC mode.
• Aspect Ratio–Selects the aspect ratio. You can select Wide,
Zoom, Cinema, Full Screen, or Normal.
Note: You can also press PICTURE to select the picture mode.
3 Press VOL+ or ENTER, then press VOL+ or VOL– to adjust the
option.

Adjusting advanced video settings

To adjust advanced picture settings:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
Note: The options shown in this graphic are for TV mode. For other modes,
the options vary.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Advanced Video Menu.
3 Press VOL+ or ENTER. The following menu opens.
4 Press CH+ or CH– to select an option. You can select:
• Noise Reduction-Spatial–Select On or Off.
• Noise Reduction-Speckle–Select On or Off.
• Noise Reduction-Temporal–Select On or Off.
• Color Temperature–Select Neutral, Warm, or Cool.
• 3D Y/C–Select On or Off.
Using your LCD TV