Unpacking; Assembling - Optika Italy B-810 Serie Manual De Instrucciones

6. Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses. Traces of grease or
other residuals may deteriorate the final image quality and corrode the optics surface in a short time.

7. Assembling

Once opened the box, the microscope parts are the following:
④
⑧
① Microscope frame
② Eyepieces
③ Objectives
④ Observation head
⑤ Condenser (according to the configuration)
⑥ Immersion oil (if 100x objectibve is included
into the configuration)
①
③
⑦ ⑥
②
⑨
⑦ Allen wrench
⑧ Dust cover
⑨ Power supply
⑩ Green filter (only for PH configuration)
⑪ Centering telescope (only for PH configura-
tion)
Page 8
⑤
⑩
⑪