Lenco LPJ-500 Manual Del Usuario página 17

- Using a MHL HDMI cable:
This projector is compatible with MHL cables: this means that you can
connect your smartphone or tablet (if MHL compatible) and stream in HD
the projector with a MHL cable (not included).
- Using a Chromecast
The HDMI connectors are compatible with the use of a chrome cast dongle
to enable you to stream wirelessly from your smartphone or tablet.
Connecting an AV Source
Follow the picture below to connect a device with an AV cable.
1. Turn off the unit before connecting the AV cable.
2. Use the AV cable to connect
3. After connecting, press the
indicator will light up GREEN
4. Press the
device will show on
5. Press the
Connecting a VGA source
Follow the picture below to connect a device with a VGA cable.
1. Turn off the projector before connecting the VGA cable.
2. Press the
connection.
3. After connect, press the
indicator will light up GREEN
4. Press the
device will show on projector screen.
a device
/SOURCE button to go to the AV mode and the video of AV
the rojector screen
p
button to turn off the unit power.
button to turn off the power of your projector before
button to turn on the projector and the power
/SOURCE button to go to the VGA mode and the video of VGA
as shown in the image below.
button to turn on the projector and power
15