Figure 7
Manual swivel
A swivel seat is provided to enable you to
mount/dismount the seat more easily at the top
of the stairs by swivelling you on to the landing.
To operate the seat swivel, wait until the stairlift
has stopped.
To swivel the seat hold either (there is one both
sides of the seat) swivel lever down or pull it up
(only up on the Simplicity or Simplicity
This will release the seat lock and allow you to
move the seat round by pushing away from the
footplate. When the seat reaches 90° it will lock
in position (Figure 7).
You should not attempt to leave the seat until
it has firmly 'clicked' into its locked position.
To swivel in the opposite direction follow the same
procedure, but push away from the landing.
Operating the swivel
L
model).
Operating your Handicare stairlift
Figure 8
Power operated swivel (optional)
In order to swivel the seat hold the operating
toggle (Figure 8 ) in the up direction. When the
stairlift reaches the top of the stairs continue to
hold the operating toggle in the up direction. The
stairlift will beep three times and then the seat will
swivel. When the seat is fully swivelled to 90° the
seat will stop.
You should not attempt to leave the seat until
it is fully rotated.
To swivel in the opposite direction follow the
same procedure in reverse. Push the operating
lever in the down direction. The seat will beep
three times and then after a short pause it will
rotate to the driving position. Continue to hold
the operating lever in the down direction. The
stairlift will then again beep three times before
beginning its descent.
USER MANUAL 7
7