Publicidad
Idiomas disponibles
Idiomas disponibles
7.2.
Manual regeneration
MANDATORY
The controller must be in service in order to enable this procedure.
NOTE
The unit returns to normal operation if no buttons are pressed within 30 seconds.
7.2.1. To initiate a manual regeneration
A
Press and hold
for 5 seconds.
→ The SFE-EV Viridion controller can be used to either start regeneration immediately or
delay it until the programmed time.
B
Use
and
to scroll between immediate regeneration (AI) or delayed regeneration
(Ad) at the programmed time.
C
Confirm with
.
→ When Delayed manual regeneration is chosen, the current day of the week and the service icon will blink until
regeneration starts.
7.2.2. To advance regeneration cycles
A
Press
to advance to the next cycle.
→ When the camshaft reaches next cycle, "#C" will be displayed.
→ Repeat
to advance through each cycle.
7.2.3. To cancel a regeneration
A
Press and hold
for 5 seconds to cancel the regeneration.
→ The controller will skip the remaining cycles and return to the service position. It may take 1 to 2 minutes.
8 .
Maintenance
MANDATORY
Cleaning and maintenance shall take place at regular intervals in order to guarantee the proper
functioning of the complete system, and be documented in the Maintenance chapter in the User Guide
document.
MANDATORY
The maintenance and service operation must be done by qualified personnel only. Failure in
respecting this may void the warranty.
8.1.
General system inspection
MANDATORY
Has to be done once a year at minimum.
Ref. MKT-UG-044 / A - 02.06.2020
User Guide Riva Viridion
15 / 108
Publicidad
