Operating Guide; Install The Fence Transmitter; Lay Out The System; Basic Planning Tips - Petsafe PRF-3004XW-20 Manual De Funcionamiento

Install the Fence Transmitter

Step
1
Place the Fence Transmitter:
• In a dry, well ventilated, protected area (1A, 1B).
• In an area where temperatures do not fall below freezing (e.g., garage, basement, shed).
• Secured to a stationary surface using appropriate mounting hardware (not included). A mounting template is
included in the back of this guide.
• At least 1 m (3 ft) from large metal objects or appliances as these items may interfere with the signal
consistency (1C).
Once you have mounted the Fence Transmitter, the Boundary Wire must exit the building. This can be
accomplished via a window or through a hole drilled through the wall. Ensure the drill path is clear of any utilities.
Make sure the Boundary Wire is not cut off or pinched by a window, door, or garage door, as this can damage it
over time and create a wire break. To prevent fires and electrical hazards, install the Fence Transmitter in buildings
that are in accordance with state and local electrical codes.
Risk of Electric Shock. Use the Fence Transmitter indoors in a dry location only.
1A
__________________________________________________

Lay Out the System

Step
2
Underground cables can carry high voltage. Have all underground cables marked before you dig to
bury your wire. In most areas, this is a free service.
For information regarding how these underground wires can affect your system's operation, see Step 3
"Position the Boundary Wire".

Basic Planning Tips

• The Boundary Wire MUST start
at the Fence Transmitter and make
a continuous loop back (2A).
• Design a layout that is suitable
for your property. Sample layouts
are provided in this section, and
a grid for designing your layout is
provided in the back of this guide.
• Twisting two sides of the
Boundary Wire cancels the signal
and allows your pet to cross over
that area safely. Plastic or metal
piping will not cancel the signal.
Twist the Boundary Wire 30 times
per metre (10 times per foot) to
cancel the signal (2A).

Operating Guide

1B
2A
30 Twists/m
10
wists/ft
T
petsafe.com
1C
1 m
(3ft)
2B
7