WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
TOOLS NEEDED
See Figure 2.
The following tool (not included or drawn to scale) is needed
for assembly:
Phillips screwdriver
FRONT HANDLE
See Figure 3.
Loosen and remove the wing nut, washer, and bolt from
the handle.
Install the handle on the power head shaft at the location
indicated by the label on the shaft.
Adjust handle up or down, if necessary, to desired operat-
ing position.
Reinstall the bolt, washer, and wing nut. Tighten wing nut
to secure.
CONNECTING THE POWER HEAD SHAFT AND
TRIMMER SHAFT
See Figure 4.
Align the two indentations in the trimmer shaft with the
screws in the power head shaft. Insert the trimmer shaft
into the power head shaft.
Push the two sections together until the trimmer shaft
stops.
CAUTION:
Be careful when sliding the two shafts together to avoid
pinching your hands or fingers.
Using a hex key, turn each of the two screws until securely
tightened.
All manuals and user guides at all-guides.com
ASSEMBLY
ATTACHING GRASS DEFLECTOR
See Figures 5 - 6.
Remove supplied screws from the trimmer head with a
Fit the grass deflector into the slots on trimmer head.
Line up the screw holes in the grass deflector with the
Install supplied screws and tighten by turning clockwise
7 — English
WARNING:
Be certain the shafts are locked into place before oper-
ating string trimmer; check it periodically for tightness
during use to avoid possible disconnection of shafts,
which could result in serious personal injury.
WARNING:
This string trimmer is designed to use only the provided
trimmer shaft and string head. It is not capable of using
other attachments or cutting heads. Attempting to use
other attachments or cutting heads could result in seri-
ous personal injury.
WARNING:
The line cut-off blade on the grass deflector is sharp.
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.
phillips screwdriver.
holes in the trimmer head.
with a phillips screwdriver.