Authorized Service Centers - Waring Commercial BB155 Serie Manual De Instrucciones

IMPORTANT
NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF
SCALDING, TEMPERATURE OF WASHING SOLUTION
AND RINSE WATER MUST NOT EXCEED 115˚F (46˚C), AND
QUANTITY USED MUST NOT EXCEED ONE-QUARTER
CONTAINER FULL.
TO SANITIZE AND DRY CONTAINER
1. Wipe down exterior of container with a soft cloth
or sponge dampened with sanitizing solution.
2. Fill container with sanitizing solution, cover, place on
motor base, and run on HIGH speed for one (1) minute.
Empty container. Dislodge any residual moisture from
blade assembly by placing empty container on motor
base and running on HIGH speed for two (2) seconds.
3. Sanitize lid and lid insert by immersing in sanitizing
solution for two (2) minutes.
4. Do not rinse container, lid, or lid insert after sanitizing
is completed. Allow parts to air-dry.
TO CLEAN AND SANITIZE MOTOR BASE
1. UNPLUG POWER CORD. Wipe down exterior surfaces
of motor base with soft cloths or sponges dampened
with washing solution, rinse water, and sanitizing
solution. Prevent liquid from running into motor base
by wringing all excess moisture from cloths or sponges
before using them.
DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION,
RINSE WATER OR SANITIZING SOLUTION.
2. Allow motor base to air-dry before using.
8

Authorized Service Centers

For a zip code search of authorized service centers near
you, visit waringcommercialproducts.com/support.
Or write to:
Waring Factory Service Center
314 Ella T. Grasso Ave.
Torrington, CT 06790
(800) 269-6640
Ship blenders for repair to the above address or to an
Authorized Service Center. Do not ship to a Waring Sales
Office.
NOTE: If your application involves the processing of
biologically active material, we request that any items
returned for service be sterilized before being shipped.
Such items must be clearly identified as having been
sterilized, both by a tag on the item itself and by a statement
in the accompanying correspondence. Waring will not
accept delivery of any return unless it is so identified.
Replacement parts for your out-of-warranty repairs are
obtainable at the address below.
LIMITED TWO YEAR WARRANTY
Waring warrants every new Waring
to be free from defects in material and workmanship for a
period of two years from the date of purchase when used
with foodstuffs, nonabrasive liquids (other than detergents)
and nonabrasive semi-liquids, providing it has not been
subject to loads in excess of the indicated rating. In addition,
the motor in this appliance has a full three year warranty.
Under this warranty, Waring will repair or replace any part
that, upon our examination, is defective in materials or
workmanship, provided the product is delivered prepaid
to the Waring Service Center at: 314 Ella T. Grasso Ave.,
Torrington, CT 06790, or any Authorized Service Center.
Commercial Blender
®
9