Deleting Channels From The Channel List; Adding Channels To The Channel List; Selecting The On-Screen Menu Language - Dynex DX-LCD37-09 Guia Del Usuario

Using your TV
Notes:
If you connect cable TV without a cable box, you may need to contact your
cable TV provider for help.
If you press POWER or MENU during the scan, the scan will be canceled.
For digital channels, if you unplug the power cord without turning off your
TV first, the channel list information may be lost.

Deleting channels from the channel list

If the channel list includes channels you do not want, you can delete the
channels from the list. When you press CH or CH , your TV skips the
deleted channels. You can still tune to a deleted analog channel by
pressing the number buttons for the channel.
To delete channels from the channel list:
1 Press MENU. The on-screen menu opens.
2 Press or to select CHANNEL, then press ENTER.
3 Press or to select CHANNEL LIST, then press ENTER.
4 Press or to select the channel you want to delete, then press
ENTER. The channel number is grayed out and the channel is
deleted from the channel list.
5 Press MENU to close the menu.
Notes:
If you want to add a deleted channel back to the channel list, press
to select the channel, then press ENTER.
When you delete a main digital channel, its sub-channels are also deleted.
Digital channels are indicated by DTV next to the channel number.
Unmarked channels are analog.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
Channel List Channel List
Highlight channels for
DTV
DTV
Ch Up/Down key selection.
DTV DTV
DTV DTV
DTV
BACK
Ch Select Watch/Skip Back
ENTER

Adding channels to the channel list

When your TV scans for channels, it looks for channels with good
signals. If a channel has a poor signal, your TV skips that channel. You
can add a skipped channel to the channel list.
Note: This feature only works for analog channels. You cannot add digital
channels to the channel list. To add digital channels, you must scan for
channels.
To add channels to the channel list:
1 Press MENU. The on-screen menu opens.
2 Press
3 Press
6
6
27
8 8
9
9
48 48
58
58
4 Press the number button for the channel you want to add, then
67
press ENTER. Registered to the Channel List is displayed.
5 Press MENU to close the menu.
Note: If external input (Video1, Video2, Component1, Component2,
HDMI1, HDMI2, or PC) is used, you cannot add the channel and
Unavailable appears.

Selecting the on-screen menu language

or To select the on-screen menu language:
1 Press MENU. The on-screen menu opens.
or to select CHANNEL, then press ENTER.
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
or to select Manual Register, then press ENTER.
Manual Register
Manual Register
For analog channels,
select a channel to register using
number keys.
For digital channels,
you must perform Autoscan function.
Ch Change
13
Register
BACK
Back