Specifications; Features; Operation; Assembly - Freeman P13INLC Manual Del Usuario

WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such alteration
or modification is misuse and could
result in hazardous conditions leading to
possible serious personal injury.

SPECIFICATIONS

DIMENSIONS 18.13" X 24.25" X 8"
WEIGHT 14.5 lbs
MAXIMUM CUTTING
13"
WIDTH
MAXIMUM CUTTING
12mm
THICKNESS
PACKING LIST
13" Laminate Flooring Cutter
Adjustment Tools
Instruction Manual
Philips Head Screws
06
HTTP://WWW.FREEMANTOOLS.COM
MODEL: P13INLC

FEATURES

13" SHEAR BLADE
Cuts materials up to 13" wide and 12mm thick
without splintering or chipping
SPRING LOADED CUTTING MECHANISM
Provides smooth, consistent pressure for clean
cuts
EXTENDED HANDLE
Extra leverage increases cutting power with
minimal effort
ANGLED MITER GAUGE
Built-in adjustable gauge for angled cuts from 0º to
45º
SAFETY LOCK
Prevents blade from moving when not in use
REPLACEABLE BLADE
Extend the life of the tool by sharpening or
replacing the blade
EXTENDED BASE
Minimizes plank movement while cutting for
maximum accuracy

OPERATION

ASSEMBLY

1. Attach the extended table base (Fig. 1-A) Fig.1 to
the blade assembly (Fig. 1-B) using 4 small Phillips
1-888-669-5672
MODEL: P13INLC
head screws (Fig. 1-C). Use two larger philips head
screws (Fig.1-D) to secure the table brace.
A
B
C
D
FIGURE 1
2. Attach the handle (Fig. 2 - A) to the top of the blade
assembly by loosening the three fixing screws (Fig.
2 - B) with a hex key. Insert the handle shaft into
the cylindrical hole (Fig. 2 - C), making sure the
recessed hole in the handle shaft (Fig. 3 - D) lines
up with the center screw on the blade assembly.
Once properly aligned, secure the handle by
tightening the center screw with a hex key. Then,
tighten the remaining two screws.
HTTP://WWW.FREEMANTOOLS.COM
B B
C
D
A
FIGURE 2
WARNING:
Secure handle in the down position and
re-engage the safety lock before storing,
carrying or transporting your laminate
flooring cutter.
07
1-888-669-5672