Installing Your Fan; Tools Required; Mounting Options - Progress Lighting AirPro P250028 Manual De Instalación

Installing Your Fan

Tools Required

Phillips screwdriver, straight slot screwdriver, step
ladder and wire cutters.

Mounting Options

If there isn't an existing UL listed mounting box,
then read the following instructions. Disconnect
the power by removing fuses or turning off circuit
breakers.
Secure the outlet box directly to the building
structure. Use appropriate fasteners and building
materials. The outlet box and its support must be
able to fully support the moving weight of the fan
(at least 35 lbs). Do not use plastic outlet boxes.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY, MOUNT FAN ONLY TO AN OULET
BOX MARKED ACCEPTABLE FOR FAN SUPPORT AND
USE THE MOUNTING SCREWS PROVIDED WITH THE
OULET BOX. OUTLET BOX COMMONLY USED FOR
THE SUPPORT OF LIGHTING FIXTURE MAY NOT BE
ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO
BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN
IF IN DOUBT.
3.
Figures 1&2 are examples of different ways to
mount the outlet box.
Outlet Box
To hang your fan where there is an existing fixture
but no ceiling joist, you may need an installation
Outlet Box
hanger bar as shown in Figure 3 (available at your
Progress Lighting Retailer).
Figure 1
Figure 2
Outlet Box
Figure 3