Progress Lighting AirPro P250028 Manual De Instalación página 8

(Figure 7) Motor to receiver electrical
1.
connections: Connect the black wire from the
fan to black wire marked "TO MOTOR L".
Connect the white wire from the fan to the
white wire marked "TO MOTOR N" from the
receiver. Connect the blue wire from the fan to
the blue wire marked "For Light" from the
receiver. Secure the wire connections with the
plastic wire connecting nuts provided.
(Figure 7) Receiver to house supply wires
2.
electrical connections: Connect the black (hot)
wire from the ceiling to the black wire marked
"AC in L" from the receiver. Connect the white
(neutral) wire from the ceiling to the white wire
marked "AC in N" from the receiver. Secure
the wire connections with the plastic wire
connecting nuts provided.
(Figure 7) If your outlet box has a ground wire
3.
(green or bare copper) connect it to the fan
ground wires; otherwise connect the hanging
bracket ground wire to the mounting bracket.
Secure the wire connection with a plastic nut
provided. After connecting the wires spread
them apart so that the green and white wires are
on one side of the outlet box and black and blue
wires are on the other side. Carefully tuck the
wire connections up into the outlet box.
5.
CAUTION
DO NOT USE WITH A WALL LIGHT DIMMER
SWITCH.
WARNING
CHECK TO SEE THAT ALL CONNECTIONS ARE
TIGHT, INCLUDING GROUND, AND THAT NO
BARE WIRE IS VISIBLE AT THE WIRE NUTS.
EXCEPT FOR THE GROUND WIRE.
Remote Control
Receiver
SUPPLY CIRCUIT
BLACK
BLACK
BLUE
WHITE
Figure 6
Ground
Conductor
Outlet Box
WHITE
Green
Ground
Lead
Ground to
Downrod
Figure 7