Installation Requirements; Tools And Parts - Jennair 30" Instrucciones De Instalación

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools Needed
Pipe wrench
Drill
Level
3/16" (4.8 mm) carbide tip
masonry bit
1/8" (3.2 mm) drill bit
For Propane/Natural Gas Conversions
Large flat‑blade screwdriver
1/2" (1.3 cm) open end
wrench
† ® TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
4

INSTALLATION REQUIREMENTS

Tools and Parts

Adjustable wrench or
5/8" (16 mm) wrench
3/8" (9.5 mm) drive ratchet
Tubing cutter
Pipe‑joint compound
resistant to Propane gas
Adjustable wrench
#1 Square Driver
1/8" x 4 / " (3 mm x 100 mm)
1
4
flat‑blade screwdriver
15/16" (24 mm)
combination wrench
1/4" (6.4 mm), 3/8" (9.5 mm),
5/16" (7.9 mm) nut drivers
Noncorrosive leak‑detection
solution
T20 Torx Driver
® ®†
#2 Phillips screwdriver
Pliers
Marker or pencil
Tape measure
Masking tape