Av Preset; Manual Programme Preset (Analogue Mode Only) - Sony Bravia KDL-S40A11E Manual De Instrucciones

AV Preset

Do the following options.
1
Press OK to select "AV Preset".
2
Press M/m to select the desired input source, then press OK.
3
Press OK. Then press M/m to select the desired option below, then
press OK.
Option
Label
Sound Offset

Manual Programme Preset (Analogue mode only)

Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Decoder"/"ATT", press PROG +/-
to select the programme number with the channel. You cannot select a programme number
that is set to skip (page 33).
1
Press OK to select "Manual Programme Preset".
2
Press M/m to select one of the following options, then press OK.
Description
Assigns a name to any equipment connected to the side and rear
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
Press M/m to select one of the following, then press OK.
AV1 (or AV2/AV3/AV4/PC/HDMI) VIDEO/DVD/CABLE/
GAME/CAM/SAT: Uses one of these preset labels.
Edit: Creates your own label. Follow steps 3 through 5 of
Programme Labels (page 30).
Skip:
Skips an input source that is not connected to any equipment when
you press M/m to select the input source.
After selecting this option, press OK.
Sets an independent volume level to each equipment connected to
the TV.
Press to select "Sound Offset", then press OK. Press M/m to
,
select the desired volume level.
Continued
31
GB