Adjusting The Signal Strength - Sivantos Rexton Smart Key Manual Del Operador

Adjusting the signal strength

The remote control works by emitting a high‑frequency audio
signal. This signal may be heard by those under 30 years old.
Two signal strength levels of the control signal are available.
By default, the remote control uses the strongest setting to
ensure a reliable connection with your hearing instruments.
A lower signal strength can be chosen if the control signal
disturbs others. Be aware that this can affect the reliability of
the connection.
To adjust the signal strength:
Lock the remote control (red color visible).
X
Hold down the button on the remote control while
X
switching the key lock to the unlock position (green
color visible).
20
Release the button.
X
The remote control is now in setup mode, the LED will be
on and the signal strength can now be changed.
To switch to the lowest signal strength, press
X
LED flashes slowly.
To switch to the strongest signal strength, press
the LED flashes quickly.
To exit the setup mode of the remote control, wait
X
30 seconds or move the key lock switch to lock position
(red color visible).
To continue using your remote control, ensure that it is
X
unlocked (green color visible).
until the
until
21