instruments do not have a battery compartment, turn them
on as described in the hearing instruments' user guide.
The hearing instruments are now in pairing mode. You have
3 minutes to complete the pairing. Follow the steps below.
Insert the hearing instruments into your ears.
X
Hold down the
button on the remote control while
X
switching the key lock to the unlock position
(green color visible).
Release the
button.
X
The remote control is now in setup mode, the LED will
be on.
8
While the remote control is in setup mode, do not
press
or
. This would change other settings.
Hold down the
button until the LED starts to flash
X
and you hear the confirmation sound in the hearing
instruments. It may take up to 10 seconds to hear the
confirmation sound.
Immediately release the
X
heard. Upon releasing the
solid green.
Ensure that the confirmation sound is heard in both
X
hearing instruments. When heard, the pairing will be
complete.
button once the sound is
button the LED will turn
9