To Sweep The Grass; Maintenance Schedule; To Stop The Product; Maintenance - Husqvarna 535iFR Manual Del Usuario

4. Use full speed when you move the product from side
to side to cut grass.
Make sure that the grass trimmer line is parallel to
the ground.

To sweep the grass

The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
to the ground and above the ground.
2. Apply full throttle.
Introduction
WARNING: Before you do any maintenance
work you must read and understand the
safety chapter.

Maintenance schedule

WARNING: Remove the battery before you
do maintenance.

Maintenance

Clean the external parts of the product with a dry cloth. Do not use water.
Examine that the start and stop button works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
Make sure that all controls work and are not damaged.
Keep the handles dry, clean and free from oil and grease.
Make sure that the cutting attachment is not damaged. Replace the cutting at-
tachment if it is damaged.
24
3. Move the trimmer head from side to side and sweep
the grass.

To stop the product

1. Release the power trigger and the power trigger
lockout.
2. Press the start/stop button until the green LED is out.
3. Press the release buttons on the battery and pull the
battery out.
Maintenance
The following is a list of the maintenance steps that you
must do on the product. See
for more information.
WARNING: Clean the trimmer head cover
each time you assemble new trimmer line to
prevent unbalance and vibrations in the
handles. Also do a check of the other parts
of the trimmer head and clean it if
necessary.
Maintenance on page 24
Daily Weekly
X
X
X
X
X
X
609 - 003 - 11.12.2019
Monthly