Husqvarna 535iFR Manual Del Usuario página 9

carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING: Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION: All servicing and repair work on
the machine requires special training. This is
especially true of the machine's safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental operation.
When you push the power trigger lockout forward (A)
and then press the power trigger lockout against the
handle (B), the power trigger (C) is released. When you
release the handle, the power trigger and the power
trigger lockout move back to their initial positions. This
movement is operated by independent springs.
C
1. Make sure that the power trigger is locked when the
lock is in its initial position.
609 - 003 - 11.12.2019
A
B
2. Press the power trigger and make sure that it goes
back to its initial position when you release it.
3. Make sure that the power trigger and the lock moves
freely and that the return spring operates correctly.
C
4. Start the product, refer to
page 20 .
5. Apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops fully.
To do a check of the user interface
1. Push and hold the start/stop button (A).
A
a) The product is on when the LED (B) is on.
b) The product is off when the LED (B) is out.
2. If the warning indicator (C) comes on or flashes,
Troubleshooting on page 27 .
refer to
To do a check of the vibration damping system
(535iRXT, 535iRX)
The vibration damping system decreases vibration in the
handles to a minimum which makes the operation
easier. The vibration damping system of the product
A
B
A
B
To start the product on
C
B
9