User interface
LED display
Battery LED indicator flashes or-
ange
Red error LED flashes
The product does not start
Error LED is lit with red light
Transportation and storage
•
The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
•
Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
•
Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
•
Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
•
Remove the battery for storage or transportation.
•
Put the battery and the battery charger in a space
that is dry and free from moisture and frost.
•
Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
•
Put the battery in storage where the temperature is
between 5 °C (41 °F) and 25 °C (77 °F) and away
from open sunlight.
•
Put the battery charger in storage where the
temperature is between 5 °C (41°F) and 45°C (113
°F) and away from open sunlight.
•
Use the battery charger only when the surrounding
temperature is between 5°C (41°F) and 40°C
(104°F).
609 - 003 - 11.12.2019
Troubleshooting
Possible faults
Low battery voltage.
Overload.
Temperature deviation.
The power trigger and the acti-
vate button are pressed at the
same time.
Dirt in the battery connectors.
The product needs servicing.
Transportation, storage and disposal
Possible action
Charge the battery.
The cutting attachment is jammed. deacti-
vate the product. Remove the battery. Clean
the cutting attachment from unwanted mate-
rials.
Let the product cool down.
Release the power trigger and the product is
active.
Clean the battery connectors with com-
pressed air or a soft brush.
Contact your servicing agent.
•
Charge the battery 30% to 50% before you put it in
storage for long periods.
•
Put the battery charger in storage in a space that is
closed and dry.
•
Keep the battery away from the battery charger
during storage. Do not let children and other not
approved persons to touch the equipment. Keep the
equipment in a space that you can lock.
•
Clean the product and do a full servicing before you
put the product in storage for a long time.
•
Use the transportation guard on the product to
prevent injuries or damage on the product during
transportation and storage.
•
Attach the product safely during transportation.
Disposal of the battery, battery charger
and product
Symbols on the product or the package of the product
means that the product is not domestic waste. Recycle it
at a recycling station for electrical and electronic
equipment. This helps to prevent damage to the
environment and to persons.
Get in touch with your local authorities, domestic waste
service or your dealer for more information about how to
recycle your product.
27