Husqvarna AUTOMOWER 430XH Manual De Usuario página 11

Note:
The display texts are shown in English
in the manual, but you will see the texts on the
product display in the chosen language.
3.3 Display
When the STOP button has been pushed and
the hatch is opened, the following information
is displayed:
• Operating information
PARKED or SCHEDULE . READY is
displayed if the product is not in any
specific operating mode, for example if
the product has just been switched on. If
the STOP button is pushed the product
displays what it did prior to the stop, for
example MOWING or SEARCHING .
• Date and clock show the current time.
• The satellite symbol is shown when the
GPS-supported navigation is activated.
Symbol (A) is shown when the symbol
has made contact with a sufficient
number of GPS satellites. Symbol (B)
shows when the product has not made
contact with a sufficient number of GPS
satellites. Symbol (A) blinks during the
first days the product is working, as it is
collecting GPS information about the
installation.
A
• The ECO symbol is displayed if the
ECO mode .
product is set in
• The black clock symbol (A) is shown
when the product is not allowed to mow
Schedule setting. If the product
due to a
is not allowed to mow due to
timer , symbol (B) is shown. If the
1352 - 001 - 09.12.2019
•
READY , MOWING ,
•
3.4 Keypad
The keypad consists of 6 groups of buttons:
•
•
•
B
•
•
•
Weather
Override schedule is
operation mode
chosen, symbol (C) is shown.
A B
The battery status shows the remaining
battery charge. If the product is loading, a
flash is also shown over the battery
symbol (A). If the product is placed in the
charging station without charging, (B) is
shown.
A
The height adjustment setting is displayed
as a scale/numerical value.
The START button is used to activate the
product. This is normally the last button to
be pushed before closing the hatch.
The BACK and OK buttons are used to
navigate in the menu. The OK button is
also used to confirm settings.
The arrow button are used to navigate in
the menu but also to make selections in
certain setting options.
The MENU button is used to go to the
main menu.
The PARK button is used to send the
product to the charging station.
The number buttons are used to enter
settings, for example PIN code, time or
exit direction.
C
B
Installation - 11