Control Panel - Husqvarna AUTOMOWER 105 Manual De Usuario

WARNING:
circumstances mount the power
supply at a height where there is a
risk it can be submerged in water (at
minimum 30 cm / 12" from the
ground). It is not permitted to place
the power supply on the ground.
min 30 cm / 12"
WARNING:
disconnect the charging station, for
instance before cleaning the
charging station or repairing the loop
wire.
WARNING:
cable and adjust the cutting height
so that the blades on the blade disc
can never come in contact with the
cable.
WARNING:
damage to electrical components,
disconnect all connections to the
charging station (power supply,
boundary wire and guide wires) if
there is a risk of a thunderstorm.
WARNING:
the power supply. Condensed water
can harm the power supply and
increase the risk of electrical shock.
For more instructions on how to do a proper
installation, refer to chapter
complete Operator's manual on Husqvarna's
website www.husqvarna.com.
14 - Installation
Do not under any
Use the plug to
Place the low voltage
To reduce the risk of
Do not encapsulate
Installation in the

3.2 Control panel

All commands and settings for the product are
made via the control panel. All functions are
accessed via a number of menus.
The control panel consists of a display and a
keypad. All information is shown on the
display and all input is done using the buttons.
Note:
The display texts are shown in English
in the manual, but you will see the texts on the
product display in the chosen language.
3.3 Display Automower
When the STOP button has been pushed and
the hatch is opened, the operation window
appears showing the time, selected operating
mode, number of mowing hours, battery status
and timer setting.
• The clock shows the current time.
• Date shows the current day.
• The number of operating hours indicates
the number of hours since the day of
manufacture that the product has been in
operation. The time that the product has
spent mowing or searching for the
charging station is counted as operating
time.
AUTO , MAN or HOME show which mode
•
of operation is selected.
• The battery status shows the remaining
battery charge.
• The ECO symbol is displayed if the
ECO mode .
product is set in
• The clock symbol indicates when the
timer settings are set. The clock symbol is
black when the product is not allowed to
mow due to a timer setting.
MENU text illustrates that the main
• The
menu can be reached by pushing the
1418 - 004 - 10.03.2020
®
105