Publicidad
Idiomas disponibles
Idiomas disponibles
15. Type plate
16. Throttle control
Control panel overview
4
1. Display
2. Key switch unlocked position
3. Key switch locked position
4. Key switch
5. Engine START/STOP button
6. ON/OFF button for the headlights
7. Down button
8. OK button
9. Up button
To do selections on the display
You can select between engine speed, session time,
battery status and ambient temperature to show
on the display during operation. Refer to
on the control panel and display on page 7 for
descriptions of the symbols.
1. Push the OK button on the control panel to open
the menu structure.
2. Push the up and down buttons on the control
panel until the correct symbol is selected.
3. Push the OK button and wait 5 seconds. The
selected symbol shows on the display together
with the current value.
Message types
There are 4 types of messages that can show on
the display. A message is shown as a symbol or a
combination of symbols.
4
3
2
Symbols
17. Oil drain plug
1
5
6
Message
type
Information
message
Caution
message
Warning
message
Error mes-
sage
Steering controls
The direction of the product is controlled by the 2
control levers. Refer to
The right control lever has a PTO (Power Take-Off)
Description
In the lower right corner of the dis-
play. Shows an engaged function or
that servicing is necessary.
In the center of the display. Shows
a condition that is not correct. Refer
Caution messages on the display
to
on page 28 .
In the center of the display. A warn-
ing triangle shows together with an
additional symbol if there is a safety
warning or the product is defective.
Warning messages on the
Refer to
display on page 29 .
In the center of the display. A warn-
ing triangle shows together with
a number. The product cannot be
operated until servicing is done.
Speak to your Husqvarna servicing
dealer.
Product overview on page 3 .
1922 - 006 - 13.12.2022
9
8
7
Publicidad
